C&M Robotics

ENG

PRODUCTS

T∙TS∙TH-SERIES

T∙TS∙TH-SERIES
for Press-fit assembly with rotation prevention

T-SERIES

Features : Correction of positional and angular errors without rotational movement.

Series
Features 		Division of work Error correction Assembly direction Flange Remark
T-Series Press-fit
(d≥D)		 Positional Vertical ○ Rotation prevention
(rotational force transmission)
TS-Series Vertical X
TH-Series Horizontal ○
T-Series Catalog
  • 각도(x)/수평(0)/비틀림(x)
    모델명 코드:T6-YYY-ZZZ
    • Compliance center length(P): Allowable tolerance of the P value is within ±5mm.
    • Payload: Tool weight of the assembly tool and a workpiece(work1).
    • Outer diameter of tool side plate(work1) should be within 90% of that of tool side plate.
    • 부품(Work1과 Work2)의 모따기 치수의 합은 2mm 이내여야 합니다.
    1. Model selection
    • Calculate the press force, compliance center length(P), and allowable weight of assembly tools.
    • Select a model that matches the values calculated in the specification table below.

    T6∙TS6∙TH6-Series Basic specification

    Model Rated press force [N] (kgf) Compliance center length(P) [mm] Payload
    [N] (kgf)    		 Outer diameter of tool side plate
    T6∙TS6∙TH6-040-048 6.0 (610) 40 14.7 (1.5) Ø48
    T6∙TS6∙TH6-050-054 7.6 (770) 50 19.6 (2.0) Ø54
    T6∙TS6∙TH6-060-060 8.5 (870) 60 19.6 (2.0) Ø60
    T6∙TS6∙TH6-070-065 15.0 (1530) 70 26.5 (2.7) Ø65
    T6∙TS6∙TH6-080-070 25.0 (2550) 80 26.5 (2.7) Ø70
    T6∙TS6∙TH6-090-078 25.0 (2550) 90 37.3 (3.8) Ø78
    T6∙TS6∙TH6-100-084 40.0 (4080) 100 37.3 (3.8) Ø84
    T6∙TS6∙TH6-110-088 40.0 (4080) 110 38.3 (3.9) Ø88
    T6∙TS6∙TH6-120-095 45.0 (4590) 120 38.3 (3.9) Ø95
    T6∙TS6∙TH6-130-099 50.0 (5100) 130 38.3 (3.9) Ø99
    T6∙TS6∙TH6-140-108 55.0 (5610) 140 78.5 (8.0) Ø108
    T6∙TS6∙TH6-150-130 60.0 (6120) 150 78.5 (8.0) Ø130
    • Option

      - Addition of DOWEL PIN HOLES: 4 holes in total, 2 each on the machine side plate and the tool side plate can be added.

    • t/th-SERIES
    • t/th-SERIES
    2. Non-standard specification

    For the specification which is not in the standard model, please check the non-standard specification in the catalog.

    3. Order-made specification

    Customized specification not listed in the catalog are also available.
    Please contact us by filling out the checklist form for order.