PRODUCTS
B∙BS∙BH∙BF∙BFS∙BFH-SERIES
B∙BS∙BH-SERIES (Standard force)
BF∙BFS∙BFH-SERIES (High force)
for Press-fit assembly
Features : Correction of positional and angular errors in the press-fit assembly.
Series
Features
|
Division of work | Rate press force | Error correction | Assembly direction | Flange |
|---|---|---|---|---|---|
| B-Series | Press-fit (d≥D) |
Standard | Positional Torsional |
Vertical | ○ |
| BS-Series | Vertical | X | |||
| BH-Series | Horizontal | ○ | |||
| BF-Series | High force | Vertical | ○ | ||
| BFS-Series | Vertical | X | |||
| BFH-Series | Horizontal | ○ |
-
- Compliance center length(P): Allowable tolerance of the P value is within ±5mm.
- Payload: Tool weight of the assembly tool and a workpiece(work1).
- Outer diameter of tool side plate(work1) should be within 90% of that of tool side plate.
- 부품(Work1과 Work2)의 모따기 치수의 합은 2mm 이내여야 합니다.
1. Model selection
- Calculate the press force, compliance center length(P), and allowable weight of assembly tools.
- Select a model that matches the values calculated in the specification table below.
B·BS·BH·BF·BFS·BFH-Series Basic specification
>Model Rated press force [N] (kgf) Compliance center length(P) [mm] Payload
[N] (kgf)Outer diameter of tool side plate B · BS · BH BF · BFS · BFH B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-040-048 6.0 (610) 9.0 (915) 40 14.7 (1.5) Ø48 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-050-054 7.6 (770) 11.0 (1155) 50 19.6 (2.0) Ø54 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-060-060 8.5 (870) 12.0 (1305) 60 19.6 (2.0) Ø60 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-070-065 15.0 (1530) 22.0 (2295) 70 26.5 (2.7) Ø65 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-080-070 25.0 (2550) 37.0 (3825) 80 26.5 (2.7) Ø70 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-090-078 25.0 (2550) 37.0 (3825) 90 37.3 (3.8) Ø78 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-100-084 40.0 (4080) 60.0 (6120) 100 37.3 (3.8) Ø84 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-110-088 40.0 (4080) 60.0 (6120) 110 38.3 (3.9) Ø88 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-120-095 45.0 (4590) 67.0 (6885) 120 38.3 (3.9) Ø95 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-130-099 50.0 (5100) 75.0 (7650) 130 38.3 (3.9) Ø99 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-140-108 55.0 (5610) 82.0 (8415) 140 78.5 (8.0) Ø108 B6 · BS6 · BH6 · BF6 · BFS6 · BFH6-150-130 60.0 (6120) 90.0 (9180) 150 78.5 (8.0) Ø130 - Option
- Addition of DOWEL PIN HOLES: 4 holes in total, 2 each on the machine side plate and the tool side plate can be added.
- Change of CENTER HOLE SIZE: Inner diameter of the center hole(s) of machine side plate and/or tool side plate size(G·K) can be changed.
2. Non-standard specification
For the specification which is not in the standard model, please check the non-standard specification in the catalog.
3. Order-made specification
Customized specification not listed in the catalog are also available.
Please contact us by filling out the checklist form for order. -
Installation Picture
-
